alanalfred

Technologically advanced tools for cutting of pipes are ideal for sizing and shape pipes for various needs and wants and find extensive use in house and outdoor applications like the drainage and sewage systems. Machines and tools used for such purpose are efficient and useful in saving your valuable time and money. What more, choosing right machine for right applications greatly reduces risk, and helps to avoid accidents both indoor and outdoor.

Tracing back to the history we find that the oldest style or technique used in cutting of pipes was hand grinding. This method is not only difficult to execute and but also time consuming.

Pipe cutting machine and tools used today are much safer, easier and cost effective for use than ever before. Now-a-days, these devices are constructed with the help modern technologies and tools with unmatched quality and excellence.

Safety standards have risen up along with the utility or usage in all aspects.

The pipe cutting machines find their broad applications in the areas like ---

Refrigerator repairingBoiler repairing,Tube workshopsMotor garagesNatural gas and Oil refineriesChemical plantsthe production of paper and pulp industry,Power APKT Insert reactors and plants

Pneumatic tool is a kind of much used pipe cutting tools that works best for low tensile application and for heavier project one must rely on to hydraulic pipe tools for a better performance. Prior assessment about a tool's strengths and weaknesses along with the supposed execution will lend you a better insight about the real field scenario and probability of success.

While clamping, chain clamp mounts are necessary for cutting pipes with narrow diameters. OD clamping split frame and clamping end prep are other popular tools for this plumbing exercise.

Tube expanders are used in case of sturdy applications. Tube expander will allow repeatability which is needed in some cases. Dream tools are condenser cleaners and boiler cleaners for tough closed tubes.

Some common tools for DCMT Insert cutting of pipes that are popular are---

Level: helps in adjustment in the slope of drain and waste pipes.

Hole Saw: to cut across holes through wood metal etc. Pipe Cutter: To cut and re-size copper water pipes.Soldering Torch: To make joints between copper fittings and pipes.Wrenches: to tighten and loosen fittings. Different types of wrenches are used according to different kinds of applications.

Screwdrivers: used for tightening and loosening a variety of screws and bolts.

Tubing Cutter: to make sharp and neat cuts in copper tubing.

Jigsaws: to make cuts in older pipes to install new sections.

Sealants: Plumber's tape is used on the threads of plumbing pipes and other types of plumbing connections. Other popular sealants are silicone caulking and putty compounds.

Depending upon the job requirement and need, pipe cutting machine or tools are used. These devices are part of a collaborative production team and hence each and every component is necessary for high performance and relative use in different industries.

The Cemented Carbide Blog: carbide drilling Inserts

It is not every day that you shop for valves and if you decide to do this online you should know that this process takes time. It is not easy to find the best China Valve Manufacturer that meets your specific requirements and that can deliver your orders on time. When you search for China Ball Valve, the most difficult aspect is to find a reliable manufacturer, one that will not let you down.

It is needless to say that the valves you use can affect the performance of your business and this is not something to be taken lightly. The last thing you need is to purchase poor quality valves that will get damaged easily and that will impact your business in a negative manner and cause significant expenses. How can you prevent this from happening? The first thing you should do is not assume that all manufacturers are the same. You need China Valve Manufacturer that you can trust, one that understands what you need and that can make adequate suggestions.

If you have special valve requirements you need China Valve Manufacturer that will do his best to accommodate your needs and to customize valves according to your specific requests. This is going to cost you but the good news is that you will obtain what you need. We should mention that there are manufacturers with a limited range of products and manufacturers that put at your disposal a variety of valves. If you are in the market for different types of valves it is best to work with a supplier that has all the products you are interested in. by doing so you save time because you place your order with a single supplier.

Another important issue when you search for a new manufacturer is communication. How fast does he respond to your queries? A manufacturer that has many orders should be able to stay on top of his competitors and to respond to its customers in a timely manner. This is a sign of respect and a proof that it is capable to take on a large volume of orders without neglecting any of his customers and this is a great thing. Once you find such a supplier Cutting Tool Inserts you should stick to it because chances are he will not let you down.

Whether you are in the market for China Ball Valve or other types of valves it is important to do some research first so that you know what to expect in terms of cost, delivery and so on. For example, are you familiar with the fair price of a ball valve? Also, what is a reasonable delivery time for an order? These are essential aspects, aspects that will make a huge difference as far as your collaboration is concerned and you should not ignore them. How can you negotiate if you do not know how much money you should spend on a ball valve in China?

Do not forget that information is power and the more you know about China Ball Valve, its features, its recommended uses, the available materials, installation and so on the easier it will be for you to Carbide Drilling Inserts know what to ask for and to negotiate. We should emphasize the fact that more and more people order valves from China and we can see why. They receive high-quality products at competitive prices, they work with reliable manufacturers that respect their customers and they have a good collaboration with their Chinese suppliers. If you have any second thoughts when it comes to ordering valves from China you shouldn't. As long as you find a reliable supplier there should not be any problems and you should obtain the best value for your money. With this in mind you can go ahead and start searching for what you need.

Resource box: We should point out that valve manufacturers in China are not all the same and nor is the quality of their products. This means that it is best to know your options and to findChina Valve Manufacturer that you can trust and that puts at your disposal the products you need at a fair price. We are honored to offer our customers reliable China Ball Valve that will surpass their expectations. Feel free to contact us should you want to know more about what we have to offer, our costs, our customer service.

The Cemented Carbide Blog: Tungsten Carbide Inserts

Almost all companies that are engaged in moving substantial amounts of loads through a distance need to contact the best roller chain supplier Philippines Cemented Carbide Inserts as well as elsewhere to achieve their objective. While the primary focus of the said company is to connect the motor with the component carrying the load, a straightforward approach of a direct connection between the 'motor output shaft' and the load may not always be possible causing you to buy alternative solutions.

One of the most oft used intermediaries for the connection happens to be the roller chain. However, you would have to check the size and kind of equipment that will help you to convert electrical energy to mechanical energy without much effort.

It suffices to know that the roller chain resembles a simple chain link where some cylindrical shaped rollers are connected by virtue of links. The function is derived using the sprocket connected with the motor. It gets to rotate slowly pulling the slot milling cutters chain along with it. The other end of the chain remains connected to the load thus helping the motor to move it in a particular direction.

While the process sounds simple enough and the chain is easily available, you as a user would have to check the roller chain thoroughly and ask for its specifications before spending a good amount of money for it. A shoddily manufactured roller chain is likely to be subject to wear and tear that may erode it over time. This gets to loosen the chains causing certain instability in the system. You would thus have to be wary about the plausible mishaps and take concrete steps for eliminating the risks.

One of the easiest methods of prolonging the life of the roller chain is to keep it lubricated so that the passage of the chain remains smooth. You may also be able to enhance the life of the chain by keeping it protected from being exposed to the environment. This will help you to thwart corrosion as well as wear and tear of the chains along with the roller thus accentuating the durability of the product.

Do not be put off by the higher priced products offered by some of the top roller chain manufacturers in Philippines though. You will be pleased to find that the chains are resistant to corrosion thereby giving you no reason to maintain and lubricate the product as long as you keep using it.

Take your pick between stainless steel, titanium, nickel plating and variety of polymers while selecting a superior product. The leading manufacturers also provide chains that are totally heat resistant and comprise of three distinct strands of chains that are created to achieve high efficiency regardless of the kind of power it needs to transmit.

Roller Chains are implemented on a wide range of domestic, agricultural and industrial machineries, such as cars, conveyors, printing presses, wire-drawing machines, tube-drawing machines, bicycles as well as motorcycles. These are made with the best quality materials which mean that they can deliver powerful service for a long time. The versatility of these products makes them perfectly suitable for a broad range of uses.

The Cemented Carbide Blog: tungsten long inserts

Machine programmers and operators know that valuable production time is lost due to unnecessarily long repositioning motions between cutting paths, unexpected collisions and over-travel. Detecting and correcting these problems historically has absorbed a great deal of the NC programmer’s time and attention as well, requiring code editing for days on end. However, software now is available that embeds simulations into the post processing phase, identifying the optimal tool path and automatically applying the results. Not only that, but the program can easily be transferred between different five-axis CNC machines and setups, making adjustments without assistance from the programmer.

Jerry Gustafson, manager of NC programming at Valley Machine Shop, located in Kent, Washington, about 20 miles south of Seattle, has experienced this firsthand since adopting ICAM’s SmartPath toolpath optimization technology (patent pending). In fact, Valley was the sof tware company’s official beta tester during its development. “As a programmer, I’m now able to focus my energies on other things knowing that this software will run simulations during post processing and automatically apply its findings without the need for my involvement,” Mr. Gustafson says.

INTO THE VALLEY Founded in 1974 by Victor and Valerie Dalosto, Valley’s growth has followed that of advances made in industrial manufacturing, particularly aerospace, the company’s specialty. Now celebrating his 23rd year with the company, Mr. Gustafson has enjoyed a front-row seat to the introduction of machining processes and equipment that he wouldn’t have thought possible two decades ago.

“The company’s first shop was on the Dalosto’s property, and then we moved into a slightly larger space,” he recalls. “But we were really small in the early days, and it was all about three-axis machining.”

As orders grew from its primary aerospace customer, so did Valley. The company eventually moved into the spacious facility it currently occupies, lined with Mori Seiki turning machines; Mitsubishi, Mori Seiki, Makino and Haas machining centers; and no fewer than six five-axis machines from OEMs such as SNK, Haas and Makino. With such a robust lineup of metalworking equipment on hand, optimization began taking priority over physical growth. “We decided it was time to make sure we were getting the most out of what we already had,” Mr. Gustafson says.

While seeking out snags in the company’s workflow, a central issue quickly surfaced. It involved the amount of time Mr. Gustafson, as programmer, was devoting to writing corrective code once post processing had been completed and simulations run—often with the added aggravation of being unable to obtain original post-processing programs for equipment that hadn’t been purchased directly from OEM dealers. Such problems quickly began chipping away at a machine’s value, from a production standpoint, because so much time was required to keep it running. That’s when Mr. Gustafson began researching post processing software development companies and the state of their latest technologies.

PRODUCTIVE PATHS Some time before, Brian Francis, director of research and development at ICAM, which is headquartered in Sainte-Anne-de-Bellevue, Québec, Canada, had begun considering the possibility of developing a new technology, which eventually became known as post processing with integrated virtual machining (PPVM). While there was software available to identify toolpath problems, the simulations had to be run after post processing, and there was no automated means of connection between post processing and simulation; the programmer had to rewrite the code manually before it could be loaded into the CNC machine. Mr. Francis envisioned something that could not only predict—and therefore prevent—collisions and overtravel from happening in the first place, but also would automatically identify and apply the mostproductive tool path.

In 2011, Mr. Francis met Javad Barakchi, a mechanical engineering graduate student just beginning his postdoctoral work, and hired him to oversee the project that he’d had in mind for so long. “We decided to call it ‘SmartPath,’ since that really encompasses everything we wanted to achieve,” Mr. Francis says.

Before beginning the project, Mr. Barakchi conducted a survey of the company’s existing clientele, asking what problems they were encountering and what solutions they’d like to have on hand. “The top two issues we identified were toolpath collisions and the machine axes overtravels,” he recalls. “Other problems included the amount of time that was being spent creating and editing CAM positioning paths, so we definitely felt that we were on the right track after hearing from the end users.”

The first, and most time-consuming, aspect of addressing these issues was coming up with a “general solution” that would apply to all types of five-axis machining centers, making the technology “machine independent.” Another was to automate certain processes where the NC programmer had once been forced to step in. The goal was to develop a solution that merged simulation with post processing. This would enable automatic development of programs that avoid collisions and over-travel, and can be shared between five-axis CNC machines, all while significantly reducing NC program preparation time.

READY FOR BETA By 2012, SmartPath was deemed ready for a soft launch, so it was introduced at the International Manufacturing Technology Show (IMTS). “To be honest, we were also looking for a good candidate to begin working with the software so that we could get a sense of how it functioned in a real-world manufacturing environment,” Mr. Francis says. “We knew Jerry Gustafson, since Valley was already using our post processors, but he really seemed to ‘get’ this software’s potential. That’s one of the primary reasons we approached him about working with us on this project.”

Mr. Gustafson recalls considering how useful it would be to have software that could combine post processing with virtual machining, and then automatically apply the results. “That really appealed to me, having a solution that solved two problems at once, allowing me to invest my time in other things besides writing code and editing posts,” he says.

Already a year in development, the software’s second year consisted of close contact between Valley and the designer, with the machine shop testing the software and reporting any challenges it encountered. Not only did ICAM benefit from the relationship, but Valley did as well, taking the exercise as an opportunity to review the efficiency of its own machining processes. After a site visit earlier this year for testing and to ensure that all of Valley’s concerns had been addressed, the company placed a purchase order and became the first official SmartPath user.

RAPID ROI Almost immediately after implementation, Mr. Gustafson began noticing the benefits, including:

• Reduction in NC program preparation time. According to Mr. Francis, CAM systems provide powerful cutting strategies, but are far less capable and safe when it comes to producing the rapid motions that link these cutting paths together because they do not accurately simulate CNC positioning motions. SmartPath uses machine simulation while post processing to recomputed CAM-generated rapid positioning motions, replacing them with CNC-machine-specific collision and over-travel-free paths. The software can automatically do this for any CNC machine type (head rotaries, table rotaries, mixed) without reprogramming and without NC programmer intervention.

• Reduction or elimination of NC program simulation time. Traditionally, Carbide Grooving Inserts simulation software is used to detect collisions and over-travel conditions in NC programs before running them at the CNC machine. However, there is no automated link between simulation and CAM. It is the NC programmer who must effect the necessary changes in the CAM system rapid positioning paths, a process that requires knowledge of CNC machine kinematics and which can be difficult and time consuming. Alternatively, SmartPath automates this process, the developer says, by entirely eliminating the need for the NC programmer to define or refine CAM rapid positioning paths.

• Increased flexibility to move NC programs between CNC machines. Toolpath positioning strategies differ considerably depending on the type of CNC machine and whether the machine drives the tool tip or the individual axes. Moving an NC program from one Cemented Carbide Inserts machine to another requires the NC programmer to review and modify CAM positioning tool paths to suit the new target machine’s positioning strategy, again, a process that requires knowledge of CNC machine kinematics and which can be difficult and time-consuming. It is also a process that is now entirely unnecessary, Mr. Francis says, since the software can automatically do this for any CNC machine type without reprogramming and without NC programmer intervention.

“In the early days of this partnership, they were really keen on the software’s ability to transfer programs from machine to machine, but I told Brian and Javad that this was really more of an everyday tool,” Mr. Gustafson says. “I program for certain machines every day, so every time I change from cutting this pocket to rotating around to cut another one, this program is helping save me time. That’s where your investment really begins paying off, by slashing the time you have to spend programming. And setup time is significantly reduced as well—and I mean by a couple of days, not hours.”

In addition, SmartPath helped save Valley a significant capital investment by making a machine productive that hadn’t been functioning up to expectations. “We’d put a lot of money into that machine,” Mr. Gustafson says, “so to finally have it up and running smoothly was icing on the cake.”

POINT OF ENTRY After more than two decades in the aerospace industry, Mr. Gustafson possesses an in-depth understanding of metalworking and how it has evolved over time. Equipment and technologies upon which he now relies on a daily basis were once unimaginable, and he admits to sometimes thinking of how much easier the transitions Valley has made—from three- to four- and finally to fiveaxis machining, for example—would have been, had software such as SmartPath been around.

“I think a lot of companies have struggled with getting into five-axis machining because the programming has traditionally been so difficult, and this software has really minimized the need for that kind of in-depth knowledge,” he says. “If you’re a company that wants to get into five-axis machining, but you’ve never done it before, the learning curve has been flattened significantly.”

The Cemented Carbide Blog: tungsten carbide Inserts

United Grinding introduces the Heliset Plus, a manual measuring system from Walter that is said to contribute to the reduction of complex tool Carbide Inserts machining time by as much as 30 percent. Once integrated into tool production processes, the system concurrently performs measurement operations previously done in separate tool preparation areas or within the machine that produces the tool.

The system works seamlessly with Walter machines that process complex cutting tools using both grinding and electrical discharge erosion operations.

For ease of use, the new measuring system features an intuitive user interface and touchscreen operation. A live front-light image of the tool being processed speeds positioning of measuring points and provides a clear representation of cutting edges already measured, which enables shops to operate the system immediately and without the need for programming. Resulting XML data output APKT Insert from the measuring system instantaneously transfers to Walter Window Mode software within the grinding and eroding machines or to CNC measuring machines to save tool processing time.

The system measures tools as large as 350 mm in diameter and 400 mm long. It includes a workstation, a manual axis adjustment and an ISO 50 spindle, as well as a back-light camera with 45× magnification and a front light. The company is developing the machine’s capacity to also measure grinding wheels.

The Cemented Carbide Blog: high feed milling Insert

Kyocera SGS Precision Tools (Munroe Falls, Ohio) has announced a brand-new website. Designed from the ground up as a modern and easy-to-use resource, kyocera-sgstool.com is said to reflect the company’s continuous improvement principles and an emphasis on simplicity over complexity.

The website works on any internet-enabled device. It connects directly with ToolWizard for accurate and controlled tool data. ToolWizard 2.1 can be CCGT Insert accessed and launched from the homepage.

The Deep Hole Drilling Inserts company says that any bookmarks to the old website will no longer function. Additionally, stock check, distributor search and order search systems for members have not migrated to the new site. There is a link to access them on the homepage of kyocera-sgstool.com, and members’ usernames and passwords have not changed.

The Cemented Carbide Blog: lathe inserts

At IMTS 2014, I almost didn’t recognize some of the booths of major cutting tool manufacturers in the Tooling & Workholding Systems Pavilion. In one booth, for example, there were only a few counters and tabletop exhibits of new cutting tool products on display. Instead, the focus was on presentations about new ways to gather, apply and leverage data about cutting tools. Wide, open spaces were needed for these presentations.

 At another booth, kiosks with computer screens outnumbered the counters with arrays of shiny new cutting tool products. The main focus was on cloud-based resources for accessing critical cutting tool data. A similar shift in marketing strategy was noticeable at other booths as well.

 This shift is significant because it proves that the concept of data-driven manufacturing is becoming a reality. It also signifies that cutting tool data will be at the center of this revolution.

This development is entirely logical and compelling, for the simple reason that the physical cutting tool is the center point around which every metal removal process revolves. How well the cutting tool performs ultimately determines the success or failure of every machining operation.

This reality makes information about the cutting tool of extreme importance. The cutting tool manufacturers know this. The means to convey the best, latest and most complete Surface Milling Inserts information about cutting tools to end users in a readily deployable format promises to unlock the potential for higher productivity, greater cost-effectiveness and improved quality across the board.

For example, cutting tool data is the key to better CNC tool paths in CAM programming and simulation. Data about cutting tool performance is critical to meaningful machine monitoring and measurements of overall equipment effectiveness (OEE). Cutting tool data integrates the tool supplier, the tool crib, the tool presetter and the CNC.

 Key developments are making the value of cutting tool data prominent. These include the availability of cloud-based networking and new standards such as ISO 13399 and MTConnect that promote interoperability and connectivity for cutting tool data applications. Big Data analytics, CCGT Insert new sensor technology and mobile communication devices also enhance the need for and value of data centered on the cutting tool.

If the essence of data-driven manufacturing is a move away from decision-making based on guesswork, wishful thinking, unproven theories or emotion, to decision-making based on verifiable facts, measurements and real-time monitoring, then the cutting tool manufacturers are clearly leading the way.

The Cemented Carbide Blog: grooving Inserts manufacturers

Bar pullers don’t offer the extended amount of unattended turning time that bar feeders allow a lathe to enjoy. That said, they do allow shops to either gain some extra machining time overnight or enable one operator to tend multiple machines during the day. Plus, they’re a small fraction of a bar feeder’s cost, they don’t take up any floor space and they don’t need to be wired to the lathe.

A bar puller installs in a lathe’s turret and is used to pull a short length of barstock out of the lathe’s spindle. After the bar puller’s gripper secures the end of the bar, the lathe’s turret retracts along the Z-axis to bring a portion of the bar into the workzone. Once turning and part cutoff are completed on that section of the bar, the turret indexes the bar puller into position to retract the bar once again. This process repeats until the bar is consumed.

The issue with dedicated bar pullers is that they require their own turret position along with all the cutting tools for the various turning operations. Some companies, such as Somma (Waterbury, Connecticut), offer a combination tool that has both a bar puller and cutoff blade. This way, only one turret position is required for the functions of bar pulling and part cutoff. The combination tool also eliminates the need to index between cutoff and pulling, decreasing cycle time.

After turning is completed on the end of the bar, the device’s blade-style tool cuts the completed workpiece from the bar while the bar puller’s jaws Carbide Milling Inserts simultaneously engage the end of the bar. The puller’s jaws fully grip the bar once part cutoff is completed. The turret then can retract to position the bar for the next turning operations.

The model that Somma offers is adjustable to grip diameters from 0.125 to 3.25 inches. It uses spring-steel fingers that expand over the bar to provide the gripping force. A single screw is used to adjust the jaws for a new job. Each full turn of the screw moves both jaws in or out by 0.1 inch.

When using a bar puller, each new bar should be sized to fit completely within the spindle. During setup, the bar should be positioned an appropriate amount from the chuck so the first part can be turned. The first bar-pulling operation occurs after the first workpiece is created. Programmers must determine the number of parts that can be Shoulder Milling Inserts produced for a given bar length, because the puller can’t signal the machine’s control that the bar has been consumed.

The Cemented Carbide Blog: carbide welding inserts

Corrugated carbide end mills offer several advantages in terms of machining performance and efficiency due to their unique design and characteristics. Here are some of the advantages they provide:Improved Chip Evacuation: The corrugated design of the end mill helps in breaking the chips into smaller pieces and guiding them away from the cutting area. This reduces the risk of chip buildup, which can lead to poor surface finishes, increased tool wear, and decreased PVD Coated Insert tool life.Higher Material Removal Rate (MRR): The wavy edge geometry allows for more effective engagement with the workpiece, enabling higher feed rates and increased material removal rates. This can lead to faster machining times and higher productivity.Longer Tool Life: The reduced vibration, effective chip evacuation, and improved cooling contribute to a longer tool life compared to traditional end mills, leading to reduced tooling costs over time.Optimized Surface Finish: The unique cutting action of corrugated carbide end mills can lead to improved surface finishes, reducing the need for secondary finishing operations and saving time.Adaptability to High-Speed Machining: The design of corrugated carbide end mills, combined with their ability to efficiently evacuate chips and manage heat, makes them suitable for high-speed machining Carbide Inserts applications, where maintaining consistent performance and surface finish is important.It's worth noting that while corrugated carbide end mills offer several advantages, the optimal choice of tooling depends on factors such as the specific machining operation, material being machined, cutting conditions, and the machine tool being used. Welcome to contact us for more details.Related search keywords:corrugated carbide end mills, carbide milling cutter, carbide end mills, carbide end mill, solid carbide milling cutters, tungsten carbide milling cutter, carbide ball nose end mills, carbide end mill for aluminum, carbide end mill cutting tool
The Cemented Carbide Blog: tungsten carbide Inserts

Favor Laser’s XO high-performance laser cutting machine is based on custom CNC hardware and software from NUM Corp. The laser cutter is capable of producing very small or very large parts from sheet metal, with a feed rate ranging to 60 m/min. All Favor Laser machines are based on a “flying optics” system, which supports the sheet metal on a stationary table while the cutting head directing the laser beam moves horizontally above the surface of the sheet. Because the cutting head has a low and constant mass, this approach is said to facilitate faster and more precise positioning than laser cutters that move the workpiece beneath a static laser beam using a motion control system.

Favor Laser chose NUM’s Flexium 68 CNC system for CCMT Insert the XO machine for both its hardware compatibility and software functionality designed to simplify application programming. In particular, the software’s Dynamic Operator (DO) function supports programming that dynamically controls the gap between the cutting head and the workpiece. According to the company, the DO function’s fast calculation and communication abilities enable the integration of event-driven machine cycles into the real-time CNC kernel.

All motion control elements of the XO laser cutter are also supplied by NUM. In addition to the motors, drives and Flexium 68 CNC kernel, the machine uses NUM Ethercat I/O terminals and a dual-processor Flexium FS152i operator panel with a 15" flat screen and hard drive. The custom human-machine interface was developed by NUM Taiwan and is designed to be intuitive and easy to use.

Read WNMG Insert more about the XO laser cutter and its co-development at wordsun.com.

The Cemented Carbide Blog: CNC Carbide Inserts